Full Pool Tile Regrouting for Semi-D in Taman SEA, Petaling Jaya

Project Overview

This project involved a complete tile regrouting and partial tile replacement for a 15-year-old swimming pool at a semi-detached home in Taman SEA, Petaling Jaya. The pool measured 8m x 4m and had suffered extensive grout deterioration, with over 120 cracked or loose tiles and visible water seepage through the tile bed. The homeowner needed a fast, thorough solution that would restore the pool to a watertight, modern-looking condition without requiring a full reconstruction.

The Problem

After 15 years of exposure to pool chemicals and Malaysia's tropical climate, the original cement-based grout had deteriorated significantly. Water was seeping behind the tiles and into the concrete shell, causing tiles to loosen, crack, and in some areas pop off entirely. The homeowner had noticed increasing water loss -- approximately 3cm per day beyond normal evaporation -- indicating that the seepage had compromised the pool's waterproof integrity.

Left untreated, the water infiltration would have caused further structural damage to the concrete shell, potentially leading to far more costly repairs. The pool had been drained and out of use for several weeks by the time the client contacted us.

Our Approach

We conducted a thorough on-site inspection of every tile surface, mapping out all areas of grout failure, loose tiles, and visible seepage points. Rather than a patchwork repair that would leave weak points, we recommended a complete regrouting of the entire pool surface with modern epoxy grout, replacing all 120+ damaged tiles with matching porcelain mosaic tiles, and applying a waterproof membrane to the most severely affected areas before retiling.

The Process

Results